How to create a bootable Windows XP SP1 CD (Nero)

Step 1

Create 3 folders - C:\WINXPSP1, C:\SP1106 and C:\XPBOOT

Step 2

Copy the entire Windows XP CD into folder C:\WINXPSP1

Step 3

You will have to download the SP1 Update, which is 133MB.

Rename the Service Pack file to XP-SP1.EXE

Extract the Service Pack from the Run Dialog using the command:

C:\XP-SP1.EXE -U -X:C:\SP1106

Step 4

Open Start/Run... and type the command:

C:\SP1106\update\update.exe -s:C:\WINXPSP1

Click OK

Folder C:\WINXPSP1 contains: Windows XP SP1

How to Create a Windows XP SP1 CD Bootable

Step 1

Download xpboot.zip

Code:

http://thro.port5.com/xpboot.zip

( no download manager !! )

Extract xpboot.zip file (xpboot.bin) in to the folder C:\XPBOOT

Step 2

Start Nero - Burning Rom.

Select File > New... from the menu.

1.) Select CD-ROM (Boot)

2.) Select Image file from Source of boot image data

3.) Set Kind of emulation: to No Emulation

4.) Set Load segment of sectors (hex!): to 07C0

5.) Set Number of loaded sectors: to 4

6.) Press the Browse... button

Step 3

Select All Files (*.*) from File of type:

Locate boot.bin in the folder C:\XPBOOT

Step 4

Click ISO tab

Set File-/Directory length to ISO Level 1 (Max. of 11 = 8 + 3 chars)

Set Format to Mode 1

Set Character Set to ISO 9660

Check all Relax ISO Restrictions

Step 5

Click Label Tab

Select ISO9660 from the drop down box.

Enter the Volume Label as WB2PFRE_EN

Enter the System Identifier as WB2PFRE_EN

Enter the Volume Set as WB2PFRE_EN

Enter the Publisher as MICROSOFT CORPORATION

Enter the Data Preparer as MICROSOFT CORPORATION

Enter the Application as WB2PFRE_EN

* For Windows XP Professional OEM substitute WB2PFRE_EN with WXPOEM_EN

* For Windows XP Home OEM substitute WB2PFRE_EN with WXHOEM_EN

Step 6

Click Burn tab

Check Write

Check Finalize CD (No further writing possible!)

Set Write Method to Disk-At-Once

Press New button

Step 7

Locate the folder C:\WINXPSP1

Select everything in the folder and drag it to the ISO compilation panel.

Click the Write CD Dialog button.

Press Write

You're done.

Read full story

Boot Windows Xp Fast Tips

Boot Winxp Fast

Follow the following steps:

1. Open notepad.exe, type "del c:\windows\prefetch\ntosboot-*.* /q" (without the quotes) & save as "ntosboot.bat" in c:\

2. From the Start menu, select "Run..." & type "gpedit.msc".

3. Double click "Windows Settings" under "Computer Configuration" and double click again on "Shutdown" in the right window.

4. In the new window, click "add", "Browse", locate your "ntosboot.bat" file & click "Open".

5. Click "OK", "Apply" & "OK" once again to exit.

6. From the Start menu, select "Run..." & type "devmgmt.msc".

7. Double click on "IDE ATA/ATAPI controllers"

8. Right click on "Primary IDE Channel" and select "Properties".

9. Select the "Advanced Settings" tab then on the device or 1 that doesn't have 'device type' greyed out select 'none' instead of 'autodetect' & click "OK".

10. Right click on "Secondary IDE channel", select "Properties" and repeat step 9.

11. Reboot your computer.

12. Now it will Boot up faster.

Read full story

23 Ways To Speed Windows XP

Since defragging the disk won't do much to improve Windows XP performance, here are 23 suggestions that will. Each can enhance the performance and reliability of your customers' PCs. Best of all, most of them will cost you nothing.

1.) To decrease a system's boot time and increase system performance, use the money you save by not buying defragmentation software -- the built-in Windows defragmenter works just fine -- and instead equip the computer with an Ultra-133 or Serial ATA hard drive with 8-MB cache buffer.

2.) If a PC has less than 512 MB of RAM, add more memory. This is a relatively inexpensive and easy upgrade that can dramatically improve system performance.

3.) Ensure that Windows XP is utilizing the NTFS file system. If you're not sure, here's how to check: First, double-click the My Computer icon, right-click on the C: Drive, then select Properties. Next, examine the File System type; if it says FAT32, then back-up any important data. Next, click Start, click Run, type CMD, and then click OK. At the prompt, type CONVERT C: /FS:NTFS and press the Enter key. This process may take a while; it's important that the computer be uninterrupted and virus-free. The file system used by the bootable drive will be either FAT32 or NTFS. I highly recommend NTFS for its superior security, reliability, and efficiency with larger disk drives.

4.) Disable file indexing. The indexing service extracts information from documents and other files on the hard drive and creates a "searchable keyword index." As you can imagine, this process can be quite taxing on any system.

The idea is that the user can search for a word, phrase, or property inside a document, should they have hundreds or thousands of documents and not know the file name of the document they want. Windows XP's built-in search functionality can still perform these kinds of searches without the Indexing service. It just takes longer. The OS has to open each file at the time of the request to help find what the user is looking for.

Most people never need this feature of search. Those who do are typically in a large corporate environment where thousands of documents are located on at least one server. But if you're a typical system builder, most of your clients are small and medium businesses. And if your clients have no need for this search feature, I recommend disabling it.

Here's how: First, double-click the My Computer icon. Next, right-click on the C: Drive, then select Properties. Uncheck "Allow Indexing Service to index this disk for fast file searching." Next, apply changes to "C: subfolders and files," and click OK. If a warning or error message appears (such as "Access is denied"), click the Ignore All button.

5.) Update the PC's video and motherboard chipset drivers. Also, update and configure the BIOS. For more information on how to configure your BIOS properly, see this article on my site.

6.) Empty the Windows Prefetch folder every three months or so. Windows XP can "prefetch" portions of data and applications that are used frequently. This makes processes appear to load faster when called upon by the user. That's fine. But over time, the prefetch folder may become overloaded with references to files and applications no longer in use. When that happens, Windows XP is wasting time, and slowing system performance, by pre-loading them. Nothing critical is in this folder, and the entire contents are safe to delete.

7.) Once a month, run a disk cleanup. Here's how: Double-click the My Computer icon. Then right-click on the C: drive and select Properties. Click the Disk Cleanup button -- it's just to the right of the Capacity pie graph -- and delete all temporary files.

8.) In your Device Manager, double-click on the IDE ATA/ATAPI Controllers device, and ensure that DMA is enabled for each drive you have connected to the Primary and Secondary controller. Do this by double-clicking on Primary IDE Channel. Then click the Advanced Settings tab. Ensure the Transfer Mode is set to "DMA if available" for both Device 0 and Device 1. Then repeat this process with the Secondary IDE Channel.

9.) Upgrade the cabling. As hard-drive technology improves, the cabling requirements to achieve these performance boosts have become more stringent. Be sure to use 80-wire Ultra-133 cables on all of your IDE devices with the connectors properly assigned to the matching Master/Slave/Motherboard sockets. A single device must be at the end of the cable; connecting a single drive to the middle connector on a ribbon cable will cause signaling problems. With Ultra DMA hard drives, these signaling problems will prevent the drive from performing at its maximum potential. Also, because these cables inherently support "cable select," the location of each drive on the cable is important. For these reasons, the cable is designed so drive positioning is explicitly clear.

10.) Remove all spyware from the computer. Use free programs such as AdAware by Lavasoft or SpyBot Search & Destroy. Once these programs are installed, be sure to check for and download any updates before starting your search. Anything either program finds can be safely removed. Any free software that requires spyware to run will no longer function once the spyware portion has been removed; if your customer really wants the program even though it contains spyware, simply reinstall it. For more information on removing Spyware visit this Web Pro News page.

11.) Remove any unnecessary programs and/or items from Windows Startup routine using the MSCONFIG utility. Here's how: First, click Start, click Run, type MSCONFIG, and click OK. Click the StartUp tab, then uncheck any items you don't want to start when Windows starts. Unsure what some items are? Visit the WinTasks Process Library. It contains known system processes, applications, as well as spyware references and explanations. Or quickly identify them by searching for the filenames using Google or another Web search engine.

12.) Remove any unnecessary or unused programs from the Add/Remove Programs section of the Control Panel.

13.) Turn off any and all unnecessary animations, and disable active desktop. In fact, for optimal performance, turn off all animations. Windows XP offers many different settings in this area. Here's how to do it: First click on the System icon in the Control Panel. Next, click on the Advanced tab. Select the Settings button located under Performance. Feel free to play around with the options offered here, as nothing you can change will alter the reliability of the computer -- only its responsiveness.

14.) If your customer is an advanced user who is comfortable editing their registry, try some of the performance registry tweaks offered at Tweak XP.

15.) Visit Microsoft's Windows update site regularly, and download all updates labeled Critical. Download any optional updates at your discretion.

16.) Update the customer's anti-virus software on a weekly, even daily, basis. Make sure they have only one anti-virus software package installed. Mixing anti-virus software is a sure way to spell disaster for performance and reliability.

17.) Make sure the customer has fewer than 500 type fonts installed on their computer. The more fonts they have, the slower the system will become. While Windows XP handles fonts much more efficiently than did the previous versions of Windows, too many fonts -- that is, anything over 500 -- will noticeably tax the system.

18.) Do not partition the hard drive. Windows XP's NTFS file system runs more efficiently on one large partition. The data is no safer on a separate partition, and a reformat is never necessary to reinstall an operating system. The same excuses people offer for using partitions apply to using a folder instead. For example, instead of putting all your data on the D: drive, put it in a folder called "D drive." You'll achieve the same organizational benefits that a separate partition offers, but without the degradation in system performance. Also, your free space won't be limited by the size of the partition; instead, it will be limited by the size of the entire hard drive. This means you won't need to resize any partitions, ever. That task can be time-consuming and also can result in lost data.

19.) Check the system's RAM to ensure it is operating properly. I recommend using a free program called MemTest86. The download will make a bootable CD or diskette (your choice), which will run 10 extensive tests on the PC's memory automatically after you boot to the disk you created. Allow all tests to run until at least three passes of the 10 tests are completed. If the program encounters any errors, turn off and unplug the computer, remove a stick of memory (assuming you have more than one), and run the test again. Remember, bad memory cannot be repaired, but only replaced.

20.) If the PC has a CD or DVD recorder, check the drive manufacturer's Web site for updated firmware. In some cases you'll be able to upgrade the recorder to a faster speed. Best of all, it's free.

21.) Disable unnecessary services. Windows XP loads a lot of services that your customer most likely does not need. To determine which services you can disable for your client, visit the Black Viper site for Windows XP configurations.

22.) If you're sick of a single Windows Explorer window crashing and then taking the rest of your OS down with it, then follow this tip: open My Computer, click on Tools, then Folder Options. Now click on the View tab. Scroll down to "Launch folder windows in a separate process," and enable this option. You'll have to reboot your machine for this option to take effect.

23.) At least once a year, open the computer's cases and blow out all the dust and debris. While you're in there, check that all the fans are turning properly. Also inspect the motherboard capacitors for bulging or leaks. For more information on this leaking-capacitor phenomena, you can read numerous articles on my site.

Following any of these suggestions should result in noticeable improvements to the performance and reliability of your customers' computers. If you still want to defrag a disk, remember that the main benefit will be to make your data more retrievable in the event of a crashed drive.

Read full story

How To Boot Xp Faster (updated)

First of all, this tweak only apply to those who only have one HDD on their primary IDE channel (nothing else on device 0 or 1) and a CD-ROM and/or DVD-ROM on the secondary IDE channel. Each time you boot Windows XP, there's an updated file called NTOSBOOT-*.pf who appears in your prefetch directory (%SystemRoot%Prefetch) and there's no need to erease any other files as the new prefetch option in XP really improves loading time of installed programs. We only want WindowsXP to boot faster and not decrease its performance. Thanks to Rod Cahoon (for the prefetch automation process...with a minor change of mine) and Zeb for the IDE Channel tweak as those two tricks, coupled together with a little modification, result in an EXTREMELY fast bootup:

1. Open notepad.exe, type "del c:windowsprefetch tosboot-*.* /q" (without the quotes) & save as "ntosboot.bat" in c:

2. From the Start menu, select "Run..." & type "gpedit.msc".

3. Double click "Windows Settings" under "Computer Configuration" and double click again on "Shutdown" in the right window.

4. In the new window, click "add", "Browse", locate your "ntosboot.bat" file & click "Open".

5. Click "OK", "Apply" & "OK" once again to exit.

6. From the Start menu, select "Run..." & type "devmgmt.msc".

7. Double click on "IDE ATA/ATAPI controllers"

8. Right click on "Primary IDE Channel" and select "Properties".

9. Select the "Advanced Settings" tab then on the device 0 or 1 that doesn't have 'device type' greyed out select 'none' instead of 'autodetect' & click "OK".

10. Right click on "Secondary IDE channel", select "Properties" and repeat step 9.

11. Reboot your computer.

WindowsXP should now boot REALLY faster.

Read full story

Best Keyboard Shortcuts

Getting used to using your keyboard exclusively and leaving your mouse behind will make you much more efficient at performing any task on any Windows system. I use the following keyboard shortcuts every day:

Windows key + R = Run menu

This is usually followed by:

cmd = Command Prompt

iexplore + "web address" = Internet Explorer

compmgmt.msc = Computer Management

dhcpmgmt.msc = DHCP Management

dnsmgmt.msc = DNS Management

services.msc = Services

eventvwr = Event Viewer

dsa.msc = Active Directory Users and Computers

dssite.msc = Active Directory Sites and Services

Windows key + E = Explorer

ALT + Tab = Switch between windows

ALT, Space, X = Maximize window

CTRL + Shift + Esc = Task Manager

Windows key + Break = System properties

Windows key + F = Search

Windows key + D = Hide/Display all windows

CTRL + C = copy

CTRL + X = cut

CTRL + V = paste

Also don't forget about the "Right-click" key next to the right Windows key on your keyboard. Using the arrows and that key can get just about anything done once you've opened up any program.

Keyboard Shortcuts

[Alt] and [Esc] Switch between running applications

[Alt] and letter Select menu item by underlined letter

[Ctrl] and [Esc] Open Program Menu

[Ctrl] and [F4] Close active document or group windows (does not work with some applications)

[Alt] and [F4] Quit active application or close current window

[Alt] and [-] Open Control menu for active document

Ctrl] Lft., Rt. arrow Move cursor forward or back one word

Ctrl] Up, Down arrow Move cursor forward or back one paragraph

[F1] Open Help for active application

Windows+M Minimize all open windows

Shift+Windows+M Undo minimize all open windows

Windows+F1 Open Windows Help

Windows+Tab Cycle through the Taskbar buttons

Windows+Break Open the System Properties dialog box

Acessability shortcuts

Right SHIFT for eight seconds........ Switch FilterKeys on and off.

Left ALT +left SHIFT +PRINT SCREEN....... Switch High Contrast on and off.

Left ALT +left SHIFT +NUM LOCK....... Switch MouseKeys on and off.

SHIFT....... five times Switch StickyKeys on and off.

NUM LOCK...... for five seconds Switch ToggleKeys on and off.

explorer shortcuts

END....... Display the bottom of the active window.

HOME....... Display the top of the active window.

NUM LOCK+ASTERISK....... on numeric keypad (*) Display all subfolders under the selected folder.

NUM LOCK+PLUS SIGN....... on numeric keypad (+) Display the contents of the selected folder.

NUM LOCK+MINUS SIGN....... on numeric keypad (-) Collapse the selected folder.

LEFT ARROW...... Collapse current selection if it's expanded, or select parent folder.

RIGHT ARROW....... Display current selection if it's collapsed, or select first subfolder.

Type the following commands in your Run Box (Windows Key + R) or Start Run

devmgmt.msc = Device Manager

msinfo32 = System Information

cleanmgr = Disk Cleanup

ntbackup = Backup or Restore Wizard (Windows Backup Utility)

mmc = Microsoft Management Console

excel = Microsoft Excel (If Installed)

msaccess = Microsoft Access (If Installed)

powerpnt = Microsoft PowerPoint (If Installed)

winword = Microsoft Word (If Installed)

frontpg = Microsoft FrontPage (If Installed)

notepad = Notepad

wordpad = WordPad

calc = Calculator

msmsgs = Windows Messenger

mspaint = Microsoft Paint

wmplayer = Windows Media Player

rstrui = System Restore

netscp6 = Netscape 6.x

netscp = Netscape 7.x

netscape = Netscape 4.x

waol = America Online

control = Opens the Control Panel

control printers = Opens the Printers Dialog

internet browser type in u're adress "google", then press [Right CTRL] and [Enter]

add www. and .com to word and go to it For Windows XP:

Copy. CTRL+C

Cut. CTRL+X

Paste. CTRL+V

Undo. CTRL+Z

Delete. DELETE

Delete selected item permanently without placing the item in the Recycle Bin. SHIFT+DELETE

Copy selected item. CTRL while dragging an item

Create shortcut to selected item. CTRL+SHIFT while dragging an item

Rename selected item. F2

Move the insertion point to the beginning of the next word. CTRL+RIGHT ARROW

Move the insertion point to the beginning of the previous word. CTRL+LEFT ARROW

Move the insertion point to the beginning of the next paragraph. CTRL+DOWN ARROW

Move the insertion point to the beginning of the previous paragraph. CTRL+UP ARROW

Highlight a block of text. CTRL+SHIFT with any of the arrow keys

 

Select more than one item in a window or on the desktop, or select text within a document. SHIFT with any of the arrow keys

Select all. CTRL+A

Search for a file or folder. F3

View properties for the selected item. ALT+ENTER

Close the active item, or quit the active program. ALT+F4

Opens the shortcut menu for the active window. ALT+SPACEBAR

Close the active document in programs that allow you to have multiple documents open simultaneously. CTRL+F4

Switch between open items. ALT+TAB

Cycle through items in the order they were opened. ALT+ESC

Cycle through screen elements in a window or on the desktop. F6

Display the Address bar list in My Computer or Windows Explorer. F4

Display the shortcut menu for the selected item. SHIFT+F10

Display the System menu for the active window. ALT+SPACEBAR

Display the Start menu. CTRL+ESC

Display the corresponding menu. ALT+Underlined letter in a menu name

Carry out the corresponding command. Underlined letter in a command name on an open menu

Activate the menu bar in the active program. F10

Open the next menu to the right, or open a submenu. RIGHT ARROW

Open the next menu to the left, or close a submenu. LEFT ARROW

Refresh the active window. F5

View the folder one level up in My Computer or Windows Explorer. BACKSPACE

Cancel the current task. ESC

SHIFT when you insert a CD into the CD-ROM drive Prevent the CD from automatically playing.

Use these keyboard shortcuts for dialog boxes:

To Press

Move forward through tabs. CTRL+TAB

Move backward through tabs. CTRL+SHIFT+TAB

Move forward through options. TAB

Move backward through options. SHIFT+TAB

Carry out the corresponding command or select the corresponding option. ALT+Underlined letter

Carry out the command for the active option or button. ENTER

Select or clear the check box if the active option is a check box. SPACEBAR

Select a button if the active option is a group of option buttons. Arrow keys

Display Help. F1

Display the items in the active list. F4

Open a folder one level up if a folder is selected in the Save As or Open dialog box. BACKSPACE

If you have a Microsoft Natural Keyboard, or any other compatible keyboard that includes the Windows logo key and the Application key , you can use these keyboard shortcuts:

Display or hide the Start menu. WIN Key

Display the System Properties dialog box. WIN Key+BREAK

Show the desktop. WIN Key+D

Minimize all windows. WIN Key+M

Restores minimized windows. WIN Key+Shift+M

Open My Computer. WIN Key+E

Search for a file or folder. WIN Key+F

Search for computers. CTRL+WIN Key+F

Display Windows Help. WIN Key+F1

Lock your computer if you are connected to a network domain, or switch users if you are not connected to a network domain. WIN Key+ L

Open the Run dialog box. WIN Key+R

Open Utility Manager. WIN Key+U

Accessibility keyboard shortcuts:

Switch Filter Keys on and off. Right SHIFT for eight seconds

Switch High Contrast on and off. Left ALT+left SHIFT+PRINT SCREEN

Switch MouseKeys on and off. Left ALT +left SHIFT +NUM LOCK

Switch Sticky Keys on and off. SHIFT five times

Switch ToggleKeys on and off. NUM LOCK for five seconds

Open Utility Manager. WIN Key+U

shortcuts you can use with Windows Explorer:

Display the bottom of the active window. END

Display the top of the active window. HOME

Display all subfolders under the selected folder. NUM LOCK+ASTERISK on numeric keypad (*)

Display the contents of the selected folder. NUM LOCK+PLUS SIGN on numeric keypad (+)

Collapse the selected folder. NUM LOCK+MINUS SIGN on numeric keypad (-)

Collapse current selection if it's expanded, or select parent folder. LEFT ARROW

Display current selection if it's collapsed, or select first subfolder. RIGHT ARROW

Read full story

PC Tips -Single Click Shutdown

Did you know that in Windows XP you can shut down your computer from the (eventually DOS prompt) command line box? Moreover, you can do this by clicking your mouse only once.
All you need to do is... right-click on an empty Desktop spot -> select New -> Shortcut -> type shutdown followed by a space, and then enter one or more of the parameters listed below -> click Next -> type a suggestive name for your new shortcut -> finally, click Finish.
This is the Shutdown.exe (located in %systemroot%\System32, usually C:\Windows\System32) syntax:
shutdown [-i|-l|-s|-r|-a] [-f] [-m \\computername] [-t xx] [-c "Text"] [-d[u][p]:xx:yy]>
Valid command line switches:
-a = Abort system shutdown in progress ONLY IF the -t xx timeout option was already set to ANY value other than 0. ALL switches except -l and -m are ignored during abort.
-c "Text" = Text comment (case insensitive) to be displayed in the Message area of the System Shutdown window. MUST be enclosed between quotes. Maximum allowed 127 ASCII characters.
-d [u][p]:xx:yy = Reason code for shutdown:
u = User code.
p = Planned shutdown code.
xx = Major reason code. Positive integer number less than 256.
yy = Minor reason code. Positive integer number less than 65536.
-f = Force running applications to close without warning.
-i = Display the shutdown interface (GUI). MUST be the first option!
-l = Log off the current user of the local computer (default action). Can NOT be used with the -m option unless the current user has Sysadmin rights, in which case the -m switch takes precedence.
-m \\computername = Remote/network computer name (most always case sensitive) to log off/restart/shut down. Current user MUST have Sysadmin rights to be allowed to use this switch!
-s = Shut down the local computer.
-r = Shut down and restart (reboot) the local computer.
-t xx = Set shutdown timer to timeout for xx seconds. IF NOT specified defaults to 20 seconds. Allowed values between 0 and 99 seconds. The -a switch is the ONLY one that CAN be used during the timeout period. 
NOTES:
The dash (-) in front of these switches can be replaced by a forward slash (/).
Spaces are NOT required to separate the shutdown command from ANY following switches, but ARE required to separate ANY switch from its following parameter(s), if any.
For example:
shutdown -s -c "Shutting down!" -t 3
tells your computer to shutdown after waiting for 3 seconds while the System Shutdown window will display text above in the Message area.
Optional: after you're done creating your customized shortcut for shutdown -> right-click on it -> select Properties -> enter your desired key "combo" in the Shortcut Key box (e.g. Ctrl + Alt + End) -> click OK/Apply.
From now on just left-click on your shutdown shortcut or hit that key combination to turn off/restart/log off your computer.

Read full story

10 Tips for PC-Maintenance

Maintaining your computer is the key to keeping it healthy and fully working and of course, fast. Windows 95 has most of the tools for maintaining your PC, but Windows 98 extends the possibilities and makes it even less of a hassle.  If you follow the list below and run the programs listed frequently, you will be guaranteed to have a maintained computer at no extra cost. There are, however, other programs in the market with stronger engines, but then again, they're not free (stop smiling...)

Most of these programs can be found under the Start, Programs, Accessories, System Tools folder.

1. Disk Defrag: It is advisable to run Defrag under Windows 95 once a month or when you add/remove programs. However, under Windows 98, you can run it every week if you want because it has a new engine, which means that the more you run it, the faster your computer will get. What happens is that your programs are placed on your hard disk in a way so that the ones you use most often are easier for the hard disk to find and run.  Make sure that the 'make my programs run faster' is ticked in the 'Settings' window in Defrag.

2. Scandisk: Running a thorough check is good once a month in both Windows 95 and 98. Run this once a month if you feel that your hard disk takes a long time to load programs.  A standard check is very fast and checks for basic disk problems concerning files and folders and lost fragments.  It takes an average 2 minutes to complete so try running it often.

3. Disk cleanup: This one is good for seeing how much disk space is being used up by unnecessary files that are in the recycle bin, temp folder, or in temporary internet folders.  You can then remove them!

4. RegClean: A simple but effective piece of software this is. You can download it for free from Microsoft's web site. It is also available on many magazine cover disks. Reg Clean takes about a minute to check the registry. Then it asks whether you want to clean out redundant or orphan file. This usually helps the computer to get rid of files that have been left behind by uninstalled programs.

5. Windows update: It's a good idea to use Windows Update to make sure your computer has all the latest fixes, patches and updates.  You can do so by clicking on its icon in the Start Menu under Windows 98.

6. TweakALL: A very handy program that allows to change settings, which cannot be changed using Windows alone!

Read full story